进口与国产COD消解测定仪测定废水COD的比对研究

应用消解分光光度法,比对了一款进口仪器和一款国产仪器应用于实际水样中COD含量测定的差异性。通过精密度、回收率、方法比对等实验分析得出,2款仪器应用电热消解分光光度法测定COD,实验结果与国标回流滴定法的实验结果基本一致,无显著性差异,具有可比性,可广泛用于水质评价和环境监测。与国产仪器相比,进口测定仪具有较小的偏差,较高的回收率。国产测定仪偏差较大的原因主要在于其比色装置,而不是用于前处理的消解装置。比较分析了2款仪器的购买和使用经济成本,为广大企事业及科研单位选用COD消解测定仪提供了有价值的基础数据和参考建议。     

SPE-HPLC法测定水中硝基苯酚类化合物

建立了以固相萃取为前处理条件,用液相色谱法测定水中10种硝基苯酚类化合物的分析方法。实验使用HLB(6 L/150 g)固相萃取柱富集水样中的目标化合物,二氯甲烷与乙酸乙酯体积比1:2的混合溶剂洗脱,采用Phenyl柱(4.6 mm×250 mm,5 μm)分离目标化合物,以乙腈(1%甲酸)/水(1%甲酸)为流动相进行梯度洗脱,二极管阵列检测器检测。10种硝基苯酚类物质在0.02~10 mg/L范围内呈现良好的线性。方法检出限为0.1~0.3 μg/L,水样加标相对标准偏差为5.19%~18.2%,平均加标回收率为49.8%~124%。该方法适用于水中10种硝基苯酚类化合物的测定。     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.     

Effect of pressure and atmosphere during hydrothermal treatment on the properties of sewage sludge-derived solid fuel

Journal of Material Cycles and Waste Management - Efforts to improve the performance of hydrothermal treatment (HT) in producing high-quality solid fuel from sewage sludge were carried out by...     

γ-Al2O3负载多金属复合催化剂选择性催化还原烟气脱硝

以γ-Al₂O₃作为载体，先后负载CeO₂，MnC₂O₄，Fe（NO₃）₃，CrO₃，Ni（NO₃）₂，NH₄VO₃等多种金属组分制备γ-Al₂O₃负载多金属复合催化剂，并用于模拟烟气的选择性催化还原脱硝。通过SEM和XRD技术对催化剂进行了表征。表征结果显示：Fe，Mn，Cr的添加能增加催化剂的低温催化活性、提高催化剂的N₂选择性;γ-Al₂O₃对活性金属氧化物的负载效果良好。实验结果表明：各金属化合物的最佳加入量为 w（MnC₂O₄·2H₂O）=20%，w（Fe（NO₃）₃·9H₂O）=15%，w（CrO₃）=10%，w（Ni（NO₃）₂·6H₂O）=5%，w（NH₄VO₃）=10%，w（CeO₂）=5%，w（γ-Al₂O₃）=35%;以在最佳正交实验条件下制得的γ-Al₂O₃负载多金属复合物为催化剂，在脱硝反应温度为205 ℃的条件下，NO转化率为96.7%;γ-Al₂O₃负载多金属复合催化剂经5次重复使用，NO转化率仍可稳定在94%左右。     

Using culturomics and social media data to characterize wildlife consumption

Wildlife provides food, medicine, clothing, and other necessities for humans, but overexploitation can disrupt the sustainability of wildlife resources and severely threaten global biodiversity. Understanding the characteristics of consumer behavior is helpful for wildlife managers and policy makers, but the traditional survey methods are laborious and time-consuming. In contrast, culturomics may more efficiently identify the features of wildlife consumption. As a case study of the culturomics approach, we examined tiger bone wine consumption in China based on social media and Baidu search engine data. Tiger bone wine is one of the most purchased tiger products; its consumption is closely related to tiger poaching, which greatly threatens wild tiger survival. We searched a popular social media website for the term “tiger bone wine” and focused on posts that were originally created from 1 January 2012 to 31 December 2018. We filtered and classified posts related to the purchase, sale, or consumption of tiger bone wine and extracted information on providers, consumption motivations, year of production, and place of origin of the tiger bone wines based on the texts and photos of these posts. We found 756 posts related to tiger bone wine consumption, 113 of which mentioned providers of tiger bone wine, including friends (53%), elder relatives (37%), peer relatives (7%), and others (3%). Out of the 756 posts, 266 indicated the motivations of tiger bone wine consumption. Tiger bone wines were consumed as a tonic (34%), medicine (23%), game product (30%), and a symbol of wealth (28%). Some posts indicated ≥2 consumption motivations. These findings were consistent with the search queries from Baidu index. Such information could help develop targeted strategies for tiger conservation. The culturomics approach illustrated by our study is a rapid and cost-efficient way to characterize wildlife consumption.     

淮海经济区城市用地全要素生产率综合评价与影响因素研究

基于Malmquist指数与收敛性分析对淮海经济区城市用地全要素生产率（TFP）进行综合评价，在此基础上构建Tobit模型研究城市用地TFP及分解效率影响因素。结果显示：(1）2006~2015年城市用地TFP均值在［0.933,1.107］之间波动，年均增长1.9%，技术进步和技术效率均有贡献，但技术进步贡献大，是主要驱动力。(2）城市用地TFP存在σ收敛与绝对β收敛，不存在条件β收敛。提升土地市场化水平能够促进城市用地TFP趋向自身稳态水平，而城市用地空间结构对此具有抑制作用；(3）各因素对城市用地TFP及分解效率影响不同。人口密度对技术效率具有促进作用，城市空间结构对技术效率与技术进步具有抑制作用；外商投资对技术进步与全要素生产率具有抑制作用，而土地市场化水平对其具有促进作用。研究指出促进技术创新与进步，提高土地市场化水平及改善人地关系，规避外商投资风险与优化城市用地空间结构能提升城市用地全要素生产率。     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

Impact of green credit on industrial structure in China: theoretical mechanism and empirical analysis

Environmental Science and Pollution Research - Chinese industrial structure is characterized by a large proportion of industries with high energy consumption and high pollution, such as coal,...